Показаны сообщения с ярлыком 3D-printer. Показать все сообщения
Показаны сообщения с ярлыком 3D-printer. Показать все сообщения

среда, 27 августа 2014 г.

3D printing crystals

There is a nice paper on 3D printing molecular structures "How to print a crystal in 3D"

However, the method is a bit difficult, it requires many steps and strange soft like Blender. The most important problem is that Blender exports shell-like (mesh) files, rather than convenient solid objects. Converting meth into a solid looks like a simple task, but my FreeCad was unable to do it - it is far too complex task. I needed it to manually make supporting material.

Here I have devised a very simple method to obtain SOLID 3D model of a structure. You need only 2 tools: FreeCad and Excel + XYZ file of your structure.

суббота, 7 июня 2014 г.

Extruder temperature + Teacup firmware

I spent quite a lot of time struggling with the extruder temperature on my repral-like 3D printer. I played and studied PID a lot, but the temperature still oscillated within horrible +5/-15C. The most unpleasant was that previously I dealt with normal (not Arduino-based) PID-controllers and this was remarkably simple. A famous title "PID wihout a PhD" made my situation even worse...

пятница, 16 мая 2014 г.

Sorcery with AD595

A few month ago I was playing with thermocouples trying to make an Arduino-based temperature sensor for reprap (3d printer) extruder hot end. Another project was a temperature sensor for laboratory application - temperature logger that required accuracy at least 0.1C in the range of 10 to 200C.
I spent a few months with no success, I cursed AD595 - huge amount of electric noise was collected by a thermocouple that provided a temperature jump of 100C when I turned on stepper motors that was unacceptable at all. My laboratory unit was totally miserable - my temperature reading was stable within +/-3C that was far too high.


среда, 9 апреля 2014 г.

Heated bed

I have started my 3d printer from rather unusual point – making the heated bed platform.
What the use of making it as it is possible just to buy it for £20? It is affordable, but I do not like the idea of using 10A power supply, because it adds £20 more for the costs, it requires thick wires. The most important is that it is a very strange idea of making 100W heater with low-voltage power supply for so simple application like keeping the temperature near 100C.

воскресенье, 23 марта 2014 г.

3D printer

Quite recently I have decided to build a 3D printer based on Arduino, old stepper motors and aluminium frame. Here I will slowly write about my progress.